Measures the adherence of coatings to metal, wood, concrete, and other hard substrates.

Key Features...

Manual hydraulic pump designed to apply smooth and continuous pressure with a single stroke

Environmentally sealed enclosure—weatherproof, dustproof and shockproof—meets or exceeds IP65

Self-aligning aluminum dolly enables accurate measurements on smooth or uneven surfaces

Pull Rate Indicator to manually monitor and adjust the rate of pull

Internal memory stores maximum pull-off pressure, pull rate, test duration and dolly size for up to 200 pulls

NEW Field replaceable AAA alkaline batteries provide up to 16 hours of testing

10, 14, 20 or 50 mm dollies maximize capability and measurement resolution across a wide range of bond strengths

4 Manual Models Available

Order Code	ATM20	ATM50	ATM50T (EN 12004-2)	ATM50C (ASTM C1583 and EN 1542)
Dolly size and stand-off*	20 mm	50 mm	50x50 mm	50 mm
Typical Applications	Higher bond strength coatings on metals	Lower bond strength coatings on wood, concrete and plastic	Cementitious adhesives for tiles	Concrete surfaces and overlays
Range	0.7 – 20 MPa 100 – 3000 psi	0.1 – 3.3 MPa 16 – 480 psi	0.1 – 2.585 MPa 13 – 375 psi	0.1 – 3.3 MPa 16 – 480 psi
Resolution			0.01 MPa (1 psi)
Accuracy			±1% Full Scale
Included Dollies	0.Ø20 mm (qty 20) Aluminum	Ø50 mm (qty 8) Aluminum	50x50 mm Plate (qty 4) with threaded post Steel	Ø50 mm (qty 4) with ≥ 25 mm thickness Steel
Cutting Tool	20 mm hole saw	50 mm hole saw	-----	50 mm diamond grit hole saw with arbor