UTG-9000 Ultrasound Thickness Gauge is applicable for measuring the thickness of any material in which ultrasonic wave can be transmitted and reflected back from the other face.
UTG-9000 comply with ASTM-E797、ISO-16809:2017 Non-destruction testing-Ultrasonic thickness measurement international testing standards can provide quick and accurate mea- surement to various workpieces such as sheets of board and processing parts. Another import- ant application of the gauge is to monitor various pipes and pressure vessels in production equipment, and monitor the degree of wear during using. It can be widely used in petroleum, chemical, mechanical, electronics, metallurgy, shipping, aerospace, aviation and other fields.
| Specification | Details |
|---|---|
| Measuring Range | 1～600mm (Materials: Steel, with Standard probe) |
| Resolution | 0.01mm |
| Measuring Unit | metric (mm) / imperial (inch) switchable |
| Measuring Accuracy | ± (0.5%H+0.03 mm) H: thickness value of measurement |
| Velocity Range | 1000-9999 m/s |
| Calibration Function | Probe zero & two-point calibration function |
| Data Storage | 3000 sets of thickness measurement data |
| Communication | USB software interface data output |
| Warning Function | Tips for upper & lower limit of thickness |
| Value Mode | With the ability to capture the minimum thickness value |
| Testing Temperature | -10～60°C (workpiece surface) |
| Measurement Cycle | Single point measurement 6 times/sec, scan mode 20 times/sec |
| Pipe Measurement | Lower limit Ø20 mm×3.0 mm (5Mhz probe) ・ Ø15 mm×2.0 mm (7Mhz probe) |
| Indication Error | ≤ ±0.1 mm |
| Calibration Standard | 4.0 mm (steel) |
| Power | 2pcs 1.5V AA size battery |
| Working Time | More than 250 hours (LED backlight off) |
| Dimensions | 145mm×74mm×32 mm (L×W×T) |
| Weight | 245g |
