VPX-WR Ultrasonic Leak Detector (w/ Dynamic Noise Discrimination)

The Superior AccuTrak® VPX-WR Ultrasonic Leak Detector represents cutting-edge technology for ultrasonic gas leak detection! This ultra-durable and waterproof instrument features our patented and trademarked "DND" technology (dynamic noise discrimination). Older leak detectors that merely use the heterodyne approach cannot provide the same leak detection capabilities, especially in loud factory environments.

VPX-WR Ultrasonic Leak Detector Applications

Leak Detection:Air, Vacuum, Refrigerants; ANY GAS!

Steam Traps: Detect live steam loss in seconds!

Valves: Detect/hear internal leakage in check, ball, needle, gate or any type of valve! Diagnose thermal expansion valves in just five minutes!

Bearings: Hear wear and lubrication problems before damage is done!

Electric Arc and Corona: Inspect circuit breakers, relays, and buss bars! Check for corrosion on contacts and proper insulation!

Pneumatics and Hydraulics: Inspect controls, hoses, tools, fittings and internal cylinders with ease!

Vibration: Detect the ultrasonic sound generated by excessive friction!


VPX-WR Ultrasonic Leak Detector Features

•Ultra-durable, waterproof design.

•Digital PEAK HOLD Feature

•Easy to use, Single control operation.

•20 to 100kHz range, NO tuning!

•Output to analyzer; converted or RAW signal.




AccuTrak VPE-2000 Specifications

Mechanical:

Shape: Cylindrical
Body Length: 9-9/16” (24.28cm)
Outside Diameter with Foam Grip 1-15.16” (49.21mm)
Overall Length: 10-1.4” (26.03cm)
Body Materials: Aluminum
Body Finish: Anodized, Hard Black (MIL-A-8625 Type3 Class2)
Connector: Fully Sealed, keyed, Multipin LEMO
Control Shaft Seal: Spring-Loaded Teflon
Body Seals: O-Rings, Front & Rear
Rear Label: Lexan
Foam Grip: Rubber
Weight: 1lb (473gr)

Electrical:

Sealed Sensor Sensitivity: -75db/V-μbar
Detection Performance*: 5mil ID @ 5PSI From 30’
(Conditions): (60db Ambient Sound Level-No In-band Sound)
Ultrasound Converter type: AFT & Heterodyne
Frequency response 20kHz-100kHz AFT
34kHz-42kHz Heterodyne
Heterodyne Oscillator: 38kHz±50Hz
Heterodyne Filter: 4kHz
Sensitivity Control: Infinitely Variable
Output Audio, Headset

Signal Output: Heterodyne
ON Indicator: Red LED
Low Battery Indicator: Flashes ON LED
Insufficient Battery Charge: Automatic Shut-Down
Battery Type: Ni-MH (Self Resetting Fuse)
Run Time: 8 hrs
Charge Time: 16hr