Category: Renishaw probing systems for coordinate measuring machines
The PH10M and PH10MQ are versatile motorised indexing heads that incorporate the Renishaw autojoint with multiwire capability.
This allows PH10M/MQ heads to carry long extension bars and sophisticated multiwired probes such as
SP25M and TP7M. There are 720 repeatable positions, set at 7.5° increments to provide probe orientation.
The highly repeatable, kinematic autojoint allows rapid probe or extension bar changing without the need for requalification.
The PH10MQ is a variant that allows the motorised head to be attached directly to the quill with the ‘cube’ of the head
inside the quill itself. This option provides a neater and shorter probe mount, with only the swivel protruding from the quill
The AM1 and AM2 adjustment modules permit correction of alignment of the probe head to machine and are fitted
between the probe head and the shank/quill of the machine
SP25M features and benefits:
The world’s most compact and versatile scanning probe system
Two sensors in one - a scanning probe, and a touch-trigger probe using
TP20 stylus modules
Rapid and repeatable interchange between highly modular system
elements provides the most effi cient solution to suit the measurement task
Excellent scanning accuracy across the entire stylus range of 20 mm to
400 mm (0.79 in to 15.75 in)
Can be used with extension bars up to 100 mm for even greater reach
Probe can be mounted on an articulating head, allowing access to many
features with fewer styli
Ultra-compact at Ø25 mm (Ø0.98 in) for superior part accessibilityi
Isolated optical metrology technology gives unrivalled measurement
performance, even with long styli
Flexible change rack where ports can be easily confi gured to carry any
system element
Bump-stop crash protection in the Z axis, together with a detachable
stylus holder for XY crash protection
Low-cost, entry level kits available with ability to easily expand the system
