The FLIR DM286 industrial imaging multimeter is the ideal instrument for electrical inspectors looking for a safe, precise, and efficient approach to detect, document, and discuss results. IGM™ (Infrared Guided Measurement) and MSX® (Multi-Spectral Dynamic Imaging) allow for safe identification of potential risks before making contact. The powerful multimeter can collect and save up to 30,000 pictures and 100 log files, as well as record thermal and visual video clips. Stream real-time data from the DM286 to your mobile device. The METERLiNK® app allows you to quickly and easily collect readings, photos, and videos for analysis, trending, and sharing.
| IR Resolution | 160 × 120 (19,200 pixels) |
|---|---|
| Display Counts | 6000 |
| AC/DC Voltage | 1000 V AC RMS ±(1.0％＋3) 1000 V DC ±(0.09%+3) |
| AC/DC Amps | 10.00 A AC RMS ±(1.5%+3) 10.00 A DC ±(1.0%+3) |
| Connectivity | Bluetooth BLE |
| Color Palettes | Iron, rainbow, arctic, white hot, and black hot |
| Field of view - visual | 71° × 56° |
| Focus | Fixed |
| Frame Rate | 9 Hz |
| Image Modes | Thermal MSX (Multi Spectral Dynamic Imaging) Thermal Camera only Digital Camera only |
| IR Resolution | 160 × 120 (19,200 pixels) |
| IR Sensitivity | 150 mK (0.15°C) |
| Spectral Response | 8–14 µm |
| Thermal Imaging Detector | FLIR Lepton® microbolometer |
| Visual Focus and FOV | Fixed focus, 71° × 56° FOV |
| Visual Resolution | 2 MP (1600 × 1200 pixels) |
| AC/DC Amps | 10.00 A AC RMS ±(1.5%+3) 10.00 A DC ±(1.0%+3) |
| AC/DC LoZ V | 1000 V AC RMS or 1000 V DC ±(1.3%+4) |
| AC/DC mVolt | AC 600.0 mV ±(1.0％＋3) DC 600.0 mV±(0.2%+3) |
| AC/DC Voltage | 1000 V AC RMS ±(1.0％＋3) 1000 V DC ±(0.09%+3) |
| Calibration Cycle | Once per year, recommended |
| Capacitance | 10.00 mF ±(4.0%+5) |
| Continuity check threshold | 10–100Ω |
| Diode Test | 1.500 V ± 0.9% |
| Display Counts | 6000 |
| Frequency Counter | 100.00 kHz ±(0.1%+5) |
| Measuring Rate | 3 samples per second |
| Resistance | 6.000 MΩ ±(0.9%+5), 60.00 MΩ ±(3.0%+5) |
| Temperature Accuracy | ±3°C (5.4°F) or ± 3% of the reading (whichever is greater) for temperatures > 25°C (77°F) ±5°C for temperatures -10°C to 25°C (14°F to 77°F) |
| Temperature Range | –5°C to 300°C (23°F to 572°F) |
| Temperature Resolution | 0.1°C (0.1°F) |
| Temperature Type K thermocouple | -40°C to 400°C DMM ± (1.0% + 3°C) / IGM ± (1.0% + 5°C) (-40°F to 752°F DMM ± (1.0% + 5.4°F) / IGM ± (1.0% + 9°F) |
| Thermal Sensitivity | 150 mK (0.15°C) |
| VFD | AC V: 1000 V AC RMS, ±(1.3%+4) at 45∽65 Hz |
| Communication Protocol | METERLiNK |
| Connectivity | Bluetooth BLE |
| Image File Format | Radiometric |
| Storage | 40,000 readings per memory set |
| Storage Media | eMMC 4GB |
| Stored Image Capacity | up to 30,000 |
| Video Recording | 50 minutes maximum duration 20 seconds max duration for file transmission |
| Display | 2.8" |
| Display Brightness | High, Medium, Low |
| Auto Power Off | For Meter: set to OFF, 2, 5, or 10 minutes For Worklight only: set to OFF, 5, 15, or 30 minutes |
| Battery | TA04, Lithium Polymer Rechargeable, 3050 mAh. Two supplied. |
| Battery life | Approx. 6.5 hours in IGM mode with display brightness set to medium. Approx. 10 hours in Multimeter mode (medium brightness) |
| Non_Contact Voltage Detector [NCV] | Yes |
| Dimensions (L x W x H) | 20 cm × 9.6 cm × 5.6 cm (7.9 in × 3.8 in × 2.2 in) |
| Included | 1 x DM286 Industrial Thermal Imaging Multimeter 1 set of CATIV 600V Test Lead 1 set of CATIV 600V Alligator Clip 1 x Type-A to Micro-USB Cable (with Data transfer capability) 1 x K-type Thermocouple (-30°C to 260°C) 1 x Soft-sided carrying case 1 x FLIR Quick Start Guide 1 x FLIR Warranty Card 2 x TA04 Rechargeable Battery Cell |
| Scanning Mode | Continuous scan. Crosshairs and laser pointer targeting. |
| Weight | 569 g (1.25 lb) without battery (approx.) |
| Worklights | x1 LED |
| Certifications | ETL, FCC, CE, RCM, UKCA, FDA, EN60825, EN50689 |
| Drop test | 2 m (6.6 ft) |
| EMC | EN61326-1 |
| Emissivity Settings | 0.10 to 1.00 (default is 0.95); select from four presets or set manually. |
| IP Rating | IP40 |
| Laser Pointer Power | ≤0.39 mW |
| Laser Type | Class I (red) |
| Laser Wavelength | 640 nm to 660 nm |
| Operating Altitude | 2000 m (6560 ft) |
| Operating Temp & Humidity | -10°C to 30°C (14°F to 86°F), <85% RH 30°C to 40°C (86°F to 104°F), <75% RH 40°C to 50°C (104°F to 122°F), <45% RH |
| Pollution Degree | 2.0 |
| Safety | IEC 61010-1 CAT IV - 600 V, CAT III - 1000 V |
| Storage temperature and relative humidity [RH] | -20°C to 60°C (-4°F to 140°F), 0–80% RH (without batteries) |
| Warranty | Limited 10-Year Warranty https://www.flir.com/testwarranty |
| Software | FLIR METERLiNK® app |
